MORGUE EQUIPMENT

AUTOPSY CARTS


Features

  • Designed for use with standard stainless steel cadaver trays (sold separately).
  • Fabricated from 1 1/2” square, 11 gauge, 304 stainless steel tubing.
  • Stainless steel has a grained finish and all welds match adjoining surfaces.
  • Four heavy duty 8” swivel casters for easy movement, brake mechanisms.

AUTOPSY TABLES


Features

  • All stainless steel construction.
  • Adjustable elevating actuators with touch control buttons.
  • Hydro-Aspirator with cold water control valve with reverse flow valve.
  • Body support solid or perforated 4 pieces 8 inches wide.
  • GFCI Two (2) duplex outlet with waterproof cover.
  • Spray Hose Assembly with cold water control valve nozzle and 10 ft. of pressure flexible hose.
  • Mixing faucet with gooseneck spout and wrist blade handles with vacuum breaker.
  • Large single compartment sink basin, 18” x 12” x 10” deep.
  • Rapid and positive drainage.
  • Removable Access Panel.

DISSECTING TABLES


Features

  • All Stainless Steel Construction.
  • Recessed Table Top with Rounded Corners for Easier Cleaning.
  • Four Swivel 8” Casters, all equipped with Brake Mechanism.
  • Table Sockets Located on all Four Corners to Accommodate Bookstands and Leg Supports.
  • The Hinged Covers Overlap and are Fitted with a Gasket to Provide a Tight Seal.
  • Bump latches are provided to Securely and Easily Close the Covers.

EVIDENCE DRYING CABINETS


Features

  • Can be wash down with decontaminating soap.
  • Cabinets can easily be stacked next to each other.
  • Lockable door easily secured with padlock (padlock not included).
  • Removable drawer has 5 shelf positions.
  • Evidence/property can be put in on top self and in removable drawer.
  • Clothes can be hanged in two positions.
  • Four (4) lockable swivel casters for easy maneuverability.
  • Dries evidence in a safe controlled environment.

EMBALMING STATIONS


Features

  • Large Sink Basin Long 12” x Wide 12” x Deep 9”.
  • Plumbling: Hot and Cold faucet with wrist blade handles.
  • Ventilation: Air ventilation chambers are supplied with quick disconnect.
  • Instrument drawer provided.
  • Spray assembly with 10’ pressure hose with cold water control valve.
  • Vacuum deluxe hydro aspirator with reverse flow.
  • Two (2) perforated stainless steel removable grids.
  • Rinse assemblies located under the perforated dissection grids.
  • Disposer switch with solenoid.
  • Florescent Light Fixture.
  • All drains slope toward large drain for quick and positive drainage.

GROSSING STATIONS


Features

  • Available in Two Sizes: 48 Inches Long & 60 Inches Long. 
  • Station features all Stainless Steel Construction with custom height adjustments via a smooth, quiet operating electric motor.
  • Station is ideal for a variety of users that require various height requirements.
  • Also available in fixed height positions. ​
  • Top Mounted Fluorescent Light Fixture.
  • Removable Trash Container.

REFRIGERATORS


Features

  • Exterior Balance - 20 gauge stucco Embossed Aluminum.
  • Interior Walls/Ceiling - 20 gauge stucco Embossed Aluminum.
  • Hardware - Heavy-Duty Chrome Plated for long lasting use.
  • Insulation - 4” Injected Polyurethane Insulation (No foam or Wood Used).
  • Electrical - Available in 115/1/60 Volt (Additional Voltage Available).
  • Racks - Rollers are removable for cleaning purposes.

STORAGE RACKS


Features

  • Used with stainless steel standard body trays (sold separately).
  • More compact than conventional cantilever storage units allowing for greater storage capacity without increasing space.
  • Can also be used in the total roll system adding even more versatility.

MORGUE EQUIPMENT

AUTOPSY CARTS


Features

  • Designed for use with standard stainless steel cadaver trays (sold separately).
  • Fabricated from 1 1/2” square, 11 gauge, 304 stainless steel tubing.
  • Stainless steel has a grained finish and all welds match adjoining surfaces.
  • Four heavy duty 8” swivel casters for easy movement, brake mechanisms.

Contact us


AUTOPSY TABLES


Features

  • All stainless steel construction.
  • Adjustable elevating actuators with touch control buttons.
  • Hydro-Aspirator with cold water control valve with reverse flow valve.
  • Body support solid or perforated 4 pieces 8 inches wide.
  • GFCI Two (2) duplex outlet with waterproof cover.
  • Spray Hose Assembly with cold water control valve nozzle and 10 ft. of pressure flexible hose.
  • Mixing faucet with gooseneck spout and wrist blade handles with vacuum breaker.
  • Large single compartment sink basin, 18” x 12” x 10” deep.
  • Rapid and positive drainage.
  • Removable Access Panel.

Contact us


DISSECTING TABLES


Features

  • All Stainless Steel Construction.
  • Recessed Table Top with Rounded Corners for Easier Cleaning.
  • Four Swivel 8” Casters, all equipped with Brake Mechanism.
  • Table Sockets Located on all Four Corners to Accommodate Bookstands and Leg Supports.
  • The Hinged Covers Overlap and are Fitted with a Gasket to Provide a Tight Seal.
  • Bump latches are provided to Securely and Easily Close the Covers.

Contact us


EVIDENCE DRYING CABINETS


Features

  • Can be wash down with decontaminating soap.
  • Cabinets can easily be stacked next to each other.
  • Lockable door easily secured with padlock (padlock not included).
  • Removable drawer has 5 shelf positions.
  • Evidence/property can be put in on top self and in removable drawer.
  • Clothes can be hanged in two positions.
  • Four (4) lockable swivel casters for easy maneuverability.
  • Dries evidence in a safe controlled environment.

Contact us


EMBALMING STATIONS


Features

  • Large Sink Basin Long 12” x Wide 12” x Deep 9”.
  • Plumbling: Hot and Cold faucet with wrist blade handles.
  • Ventilation: Air ventilation chambers are supplied with quick disconnect.
  • Instrument drawer provided.
  • Spray assembly with 10’ pressure hose with cold water control valve.
  • Vacuum deluxe hydro aspirator with reverse flow.
  • Two (2) perforated stainless steel removable grids.
  • Rinse assemblies located under the perforated dissection grids.
  • Disposer switch with solenoid.
  • Florescent Light Fixture.
  • All drains slope toward large drain for quick and positive drainage.

Contact us


GROSSING STATIONS


Features

  • Available in Two Sizes: 48 Inches Long & 60 Inches Long. 
  • Station features all Stainless Steel Construction with custom height adjustments via a smooth, quiet operating electric motor.
  • Station is ideal for a variety of users that require various height requirements.
  • Also available in fixed height positions. ​
  • Top Mounted Fluorescent Light Fixture.
  • Removable Trash Container.

Contact us


REFRIGERATORS


Features

  • Exterior Balance - 20 gauge stucco Embossed Aluminum.
  • Interior Walls/Ceiling - 20 gauge stucco Embossed Aluminum.
  • Hardware - Heavy-Duty Chrome Plated for long lasting use.
  • Insulation - 4” Injected Polyurethane Insulation (No foam or Wood Used).
  • Electrical - Available in 115/1/60 Volt (Additional Voltage Available).
  • Racks - Rollers are removable for cleaning purposes.

Contact us


STORAGE RACKS


Features

  • Used with stainless steel standard body trays (sold separately).
  • More compact than conventional cantilever storage units allowing for greater storage capacity without increasing space.
  • Can also be used in the total roll system adding even more versatility.

Contact us


Looking for something not listed here? Contact us

Looking for something not listed here? ​Contact us